How To Install Window Blinds In Phoenix

Countless Phoenix residents opt for window blinds when they require more privacy and governance over natural light in their homes. They’re a useful and budget-friendly window covering. Skilled DIYers may also secure them in just a few steps. Even so, nothing beats the ease of hiring a professional window treatment installer. Here are the essential steps of putting up window blinds and when to phone the experts to complete it for you.

Take Measurements And Mark Everything Exactly

Before you start, determine if you want inside-mount or outside-mount blinds. This vital bit of info will let you know where to measure. Get measurements of the height, width, and depth inside your window frame for inside-mount options. For outside-mount blinds, find the width and height of your window, counting the trim, and add three inches to each measurement to make sure you get adequate coverage. Measure exactly–don’t round up or down. Improperly measured blinds won’t function satisfactorily.

Choose Your Blinds

When you know your measurements, you can shop for blinds. You might already know what kind of blinds you would like. Pick blinds that are as even with your measurements as possible. Off-the-rack blinds may not fit precisely, either sticking out too far or not meeting the edge of the window entirely. Be sure to get fasteners that let you install the blinds at the appropriate depth, as well. You should go with specially made blinds for a perfect fit.

Install Your Window Blinds

Your blinds should be accompanied by instructions. Adhere to them to affix your exact product. If you want a preview of how challenging it is to install window blinds in Phoenix, here are several common steps to give you a better understanding.

 

Inside Mount Blinds

 

1. Place a bracket at the top of the window’s frame about one inch from the side. Check that this placement won’t interfere with the blind’s function. Utilize a pencil to indicate the bracket holes.
2. Drill pilot holes in the indicated areas.
3. Situate the bracket holes with your pilot holes and drill in the screws.
4. Redo these initial three steps for the second bracket.
5. Pop the end caps onto the blind’s top rail. Position the top rail into the brackets.

Attach the tilt wand and try it out. In addition, evaluate the pull cord.

Outside Mount Blinds

1. Determine if you’re mounting on the wall above the window or the window trim. Hold up the headrail and ensure the blind covers the lower edges of the window.
2. Mark each end of the headrail.
3. Measure four inches from both headrail marks and mark holes for the brackets.
4. Drill pilot holes on your marks.
5. Line up the bracket openings with your wall holes and attach with screws.
6. Position the headrail into the brackets.

Connect the tilt wand and test out everything to make sure it works.

Pick The Most Effortless Way To Install Blinds 

As you know, you don’t need to put up blinds by yourself. The most effortless way to install window blinds in Phoenix is to employ an expert window treatment installer. They will work with you every step of the way. They’ll help you pick blinds that match your needs, make accurate measurements for a custom product, and put them up for you. They guide customers daily, so they’ll do it quickly and precisely. They’ll be able to troubleshoot any challenges without taking hours trying to find help online. A window treatment installer will also offer better-quality blinds than box stores or online resellers.

Save Yourself The Trouble And Hire Sunburst Shutters To Install Your Window Blinds In Phoenix

Getting new window blinds in Phoenix couldn’t be simpler when you turn to Sunburst Shutters Phoenix. We’ll help you find custom blinds that will match your windows precisely, and our expert installation crew will attach them for you. All you must do is contact 480-485-7743 or fill out the form below to schedule a no-cost in-home consultation.